Archway Metal Detector Door with 24 zones , 7 Inch LCD Screen
Input voltage: 100-240V, 50/60Hz
Power: <20W
Net weight: 71KG
Working temperature: -20℃ ~ 45℃
Alarm: Visible and audible alarm
Inner Dimensions: 2000mm (High) x 700mm (Wide) x 605mm (Deep)
External Dimensions: 2230mm (High) x 830mm (Wide) x 730mm (Deep)
【PERFORMANCE AND FEATURES】
Accurate Positioning: 24 overlapping network detection
zone,bilateral transmit and receive, can be accurately positioned
todetect objects, intuitive display of the target location.
Micro Processor Technology: the scanning electromagnetic wave
generated by the microcomputer control circuit, the scanning rate
can be precisely controlled.
Sensitivity Adjustable: each detection zone has 256 sensitivity
levels (0 ~ 255). Preset metal size, you can exclude the
coins,keys, jewelry, belt buckle etc.
Digital Pulse Technology: digital signal processing and filtering
system, has excellent anti-interference ability.
Password Protection: only the correct password can changes the
sensitivity and other parameters. Password with four digits, can be
set by the user.
Count Statistics: pass count and alarm count. Harmless to human
body: harmless to heart pacemaker, pregnant
women, magnetic floppy disk, recording tapes etc.
Power Supply Security: the power supply on the top of the control
box, waterproof.
Waterproof Foot Cover: not only can fixed the device, but also
waterproof.
INSTALLATION
1. Remove the package of control unit and door panel.
2. Put the control unit case and door panels as above picture
~ 8 ~
shown, then connect the left and right door panel with the control
unit case by bolts and nuts. Tighening screws.
3. Probe line of the left and right door panel tight inserted into
the
motherboard corresponding socket respectively.
4. Install the screw on the control unit case cover.
5. Lift the walk through metal detector to the vertical position
and
move to the assigned position.
6. Plug power cable
